Mechanisms of selective laser sintering and heat transfer in Ti powder
Tolochko, Nikolay K. Arshinov, Maxim K. Gusarov, Andrey V. Titov, Victor I. Laoui, Tahar Froyen, Ludo
Tolochko, Nikolay K.
Arshinov, Maxim K.
Gusarov, Andrey V.
Titov, Victor I.
Laoui, Tahar
Froyen, Ludo
Editors
Other contributors
Affiliation
Epub Date
Issue Date
2003
Submitted date
Alternative
Abstract
Coupled metallographic examination and heat transfer numerical simulation are applied to reveal the laser sintering mechanisms of Ti powder of 63-315?µm particle diameter. A Nd:YAG laser beam with a diameter of 2.7-5.3?mm and a power of 10-100?W is focused on a bed of loose Ti powder for 10?s in vacuum. The numerical simulation indicates that a nearly hemispherical temperature front propagates from the laser spot. In the region of a-Ti just behind the front, heat transfer is governed by thermal radiation. The balling effect, formation of melt droplets, is not observed because the temperature increases gradually and the melt appears inside initially sintered powder which resists the surface tension of the melt. (Emerald Publishing Group Limited)
Citation
Rapid Prototyping Journal, 9(5): 314-326
Publisher
Journal
Research Unit
PubMed ID
PubMed Central ID
Embedded videos
Additional Links
Type
Journal article
Language
en
Description
This paper discusses how the estimation of the temperature field in the powder bed in selective laser sintering is a key issue for understanding sintering/binding mechanisms and for process optimisation. Carried out within a European research project, funded by INTAS (No. 99-1559, 2000-02), a model of independent small thermal contacts to calculate the effective contact conductivity in Ti powder bed was developed. This paper won the Emerald Literati Awards' Outstanding Paper 2004 (http://www.emeraldinsight.com/literaticlub/winners).
Series/Report no.
ISSN
13552546