Show simple item record

dc.contributor.authorCerminara, Adriano
dc.contributor.authorHermann, Tobias
dc.contributor.authorIfti, Hassan Saad
dc.contributor.authorDeiterding, Ralf
dc.contributor.authorSandham, Neil
dc.contributor.authorMcGilvray, Matthew
dc.date.accessioned2021-01-04T12:08:37Z
dc.date.available2021-01-04T12:08:37Z
dc.date.issued2020-12-14
dc.identifier.citationCerminara, A., Hermann, T., Ifti, H.S., Deiterding, R., Sandham, N. and McGilvray, M. (2021) Influence of instability modes on cooling performance in hypersonic boundary layer with slot injection, Aerospace Science and Technology, 109, 106409.en
dc.identifier.issn1270-9638en
dc.identifier.doi10.1016/j.ast.2020.106409en
dc.identifier.urihttp://hdl.handle.net/2436/623850
dc.descriptionThis is an accepted manuscript of an article published by Elsevier in Aerospace Science and Technology on 14/12/2020, available online: https://doi.org/10.1016/j.ast.2020.106409 The accepted version of the publication may differ from the final published version.en
dc.description.abstractA combined numerical-experimental investigation is presented with focus on the effects of boundary-layer instabilities and transition on the wall cooling performance in a Mach 5 low-enthalpy flow over a flat plate, with coolant injection achieved through a row of slots. The numerical study has been performed through direct numerical simulation (DNS) of the compressible Navier-Stokes equations, and is supported by results from linear stability analysis (LST) for the considered boundary layer. The experiments have been conducted in the High Density Tunnel (HDT) of the Oxford Thermofluids Institute, and include several blowing ratio conditions of injected air for the same freestream conditions. Surface heat transfer and pressure measurements, film effectiveness measurements, and Schlieren images are presented. The analysis links the wall cooling performance to the growth of imposed unstable boundary layer modes. Results indicate that 2D and 3D unstable modes, pertaining to the class of first instability modes, exist in the laminar boundary layer, and that imposition of these modes at different amplitudes leads to different states of the boundary layer, which we refer to as a perturbed state and a transitional state for medium and high amplitude respectively. As confirmed by comparison with experimental data, the perturbed and transitional states of the boundary layer significantly affect the wall cooling performance, providing an increase of the wall heat flux that results in a reduction of the beneficial effects of cooling.en
dc.formatapplication/pdfen
dc.languageen
dc.language.isoenen
dc.publisherElsevieren
dc.relation.urlhttps://www.sciencedirect.com/science/article/abs/pii/S1270963820310919?via%3Dihuben
dc.subjecthypersonic flowen
dc.subjectwall coolingen
dc.subjectboundary layer stabilityen
dc.titleInfluence of instability modes on cooling performance in hypersonic boundary layer with slot injectionen
dc.typeJournal articleen
dc.identifier.journalAerospace Science and Technologyen
dc.date.updated2020-12-29T14:57:41Z
dc.date.accepted2020-11-30
rioxxterms.funderUniversity of Wolverhamptonen
rioxxterms.identifier.projectUOW04012021ACen
rioxxterms.versionAMen
rioxxterms.licenseref.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/en
rioxxterms.licenseref.startdate2021-12-14en
dc.source.volume109
dc.source.beginpage106409
dc.source.endpage106409
dc.description.versionAccepted version
refterms.dateFCD2021-01-04T12:07:36Z
refterms.versionFCDAM


Files in this item

Thumbnail
Name:
Publisher version
Thumbnail
Name:
Cerminara_et_al_Influence_of_i ...
Size:
1.547Mb
Format:
PDF

This item appears in the following Collection(s)

Show simple item record

https://creativecommons.org/licenses/by-nc-nd/4.0/
Except where otherwise noted, this item's license is described as https://creativecommons.org/licenses/by-nc-nd/4.0/