Recent Submissions

  • A Network Biology Approach Identifies Molecular Cross-Talk between Normal Prostate Epithelial and Prostate Carcinoma Cells.

    Trevino, Victor; Cassese, Alberto; Nagy, Zsuzsanna; Zhuang, Xiaodong; Herbert, John; Antzack, Philipp; Clarke, Kim; Davies, Nicholas; Rahman, Ayesha; Campbell, Moray J; Guindani, Michele; Bicknell, Roy; Vannucci, Marina; Falciani, Francesco (Public Library of Science (United States), 2016-04)
    The advent of functional genomics has enabled the genome-wide characterization of the molecular state of cells and tissues, virtually at every level of biological organization. The difficulty in organizing and mining this unprecedented amount of information has stimulated the development of computational methods designed to infer the underlying structure of regulatory networks from observational data. These important developments had a profound impact in biological sciences since they triggered the development of a novel data-driven investigative approach. In cancer research, this strategy has been particularly successful. It has contributed to the identification of novel biomarkers, to a better characterization of disease heterogeneity and to a more in depth understanding of cancer pathophysiology. However, so far these approaches have not explicitly addressed the challenge of identifying networks representing the interaction of different cell types in a complex tissue. Since these interactions represent an essential part of the biology of both diseased and healthy tissues, it is of paramount importance that this challenge is addressed. Here we report the definition of a network reverse engineering strategy designed to infer directional signals linking adjacent cell types within a complex tissue. The application of this inference strategy to prostate cancer genome-wide expression profiling data validated the approach and revealed that normal epithelial cells exert an anti-tumour activity on prostate carcinoma cells. Moreover, by using a Bayesian hierarchical model integrating genetics and gene expression data and combining this with survival analysis, we show that the expression of putative cell communication genes related to focal adhesion and secretion is affected by epistatic gene copy number variation and it is predictive of patient survival. Ultimately, this study represents a generalizable approach to the challenge of deciphering cell communication networks in a wide spectrum of biological systems.
  • Ionically Crosslinked Chitosan Hydrogels for the Controlled Release of Antimicrobial Essential Oils and Metal Ions for Wound Management Applications

    Kenward, M.A.; Amin, Mohd; Martin, Claire; Low, Wan Li (MDPI AG, Basel, Switzerland, 2016-03-01)
    The emerging problems posed by antibiotic resistance complicate the treatment regime required for wound infections and are driving the need to develop more effective methods of wound management. There is growing interest in the use of alternative, broad spectrum, pre-antibiotic antimicrobial agents such as essential oils (e.g., tea tree oil, TTO) and metal ions (e.g., silver, Ag+). Both TTO and Ag+ have broad spectrum antimicrobial activity and act on multiple target sites, hence reducing the likelihood of developing resistance. Combining such agents with responsive, controlled release delivery systems such as hydrogels may enhance microbiocidal activity and promote wound healing. The advantages of using chitosan to formulate the hydrogels include its biocompatible, mucoadhesive and controlled release properties. In this study, hydrogels loaded with TTO and Ag+ exhibited antimicrobial activity against P. aeruginosa, S. aureus and C. albicans. Combining TTO and Ag+ into the hydrogel further improved antimicrobial activity by lowering the effective concentrations required, respectively. This has obvious advantages for reducing the potential toxic effects on the healthy tissues surrounding the wound. These studies highlight the feasibility of delivering lower effective concentrations of antimicrobial agents such as TTO and Ag+ in ionically crosslinked chitosan hydrogels to treat common wound-infecting pathogens.
  • Characterisation and in vitro antimicrobial potential of liposome encapsulated silver ions against Candida albicans.

    Kenward, M A; Hill, D J; Martin, C; Low, Wan Li (Taylor & Francis, 2016-01)
    Liposomes are biocompatible, biodegradable, controlled delivery systems with the ability to encapsulate both lipophilic and hydrophilic compounds, including metal ions. Liposome encapsulated Ag(+) (lipo-Ag(+)), prepared by reverse-phase evaporation, was used as a controlled delivery system against Candida albicans. Characterisation of the lipo-Ag(+) indicated that the multilamellar vesicles with diameters ranging between ≈ 0.5 and 5.0 μm showed potential as a controlled delivery system to consistently deliver Ag(+) to C. albicans. Results from inductively coupled plasma (ICP) analysis showed higher association of cell bound Ag(+) at 15 mins post exposure when compared to unencapsulated Ag(+). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicate detrimental effects of Ag(+) on C. albicans cell structure. These effects along with the ICP results also correlate with previously reported time kill experiment observations.
  • Thermal energy storage using metal–organic framework materials

    Elsayed, Ahmed; Elsayed, Eman; AL-Dadah, Raya; Mahmoud, Saad; Elshaer, Amr; Kaialy, Waseem (Applied Energy, 2016-04-05)
    Metal–organic framework (MOF) materials are new adsorbent materials that have high surface area and pore volume and hence high adsorption uptake. The previous exceptional properties make this class of materials have a great potential in many applications like cooling, gas separation and energy storage. However, there is very limited information on the performance of metal–organic framework materials in energy storage applications and their performance compared to conventional adsorbents. This paper aims to present an experimental characterisation of CPO-27(Ni) MOF material for water adsorption and to investigate its viability for energy storage. CPO-27(Ni) (known as MOF-74(Ni)), which is a MOF material that has high water adsorption capabilities of 0.47 gH2O gads−1 and hydrothermally stable and can be supplied in large quantities. Firstly, the material water adsorption isotherms were predicated using Materials Studio software via the material structure information and then compared to the experimentally measured isotherms. The experimentally measured isotherms and kinetics were used to model a double bed adsorption system for energy storage application using Simulink–Matlab software coupled with Nist RefProp thermophysical routines. Finally, the performance of CPO-27(Ni) was then compared with silica gel. The CPO-27(Ni) was found to outperform silica gel at long half cycle time (more than 30 min) at low evaporating temperature making it suitable for energy storage applications. The energy stored in the condenser and the adsorption bed was found to be dependent mostly on the regeneration and the cooling temperatures. The potential of the energy recovered from the adsorption bed can be double the one recovered from the condenser. Also, the energy recovery during condensation and adsorption was found to be independent of the reactor conductance except at small conductance ratio. Finally, the adsorption unit cooling water flow strategy was found to affect the amount of the energy recovered as recirculating the cooling water through the adsorption bed and then condenser was found to decrease the recovered energy from the condenser by 4%.
  • Recent advances in the engineering of nanosized active pharmaceutical ingredients: Promises and challenges

    Kaialy, Waseem; Al Shafiee, Maen (Elsevier BV, 2016-02)
    The advances in the field of nanotechnology have revolutionized the field of delivery of poorly soluble active pharmaceutical ingredients (APIs). Nanosized formulations have been extensively investigated to achieve a rapid dissolution and therefore pharmacokinetic properties similar to those observed in solutions. The present review outlines the recent advances, promises and challenges of the engineering nanosized APIs. The principles, merits, demerits and applications of the current ‘bottom-up’ and ‘top-down’ technologies by which the state of the art nanosized APIs can be produced were described. Although the number of research reports on the nanoparticle engineering topic has been growing in the last decade, the challenge is to take numerous research outcomes and convert them into strategies for the development of marketable products.
  • A methodological evaluation and predictive in silico investigation into the multi-functionality of arginine in directly compressed tablets

    ElShaer, Amr; Kaialy, Waseem; Akhtar, Noreen; Iyire, Affiong; Hussain, Tariq; Alany, Raid; Mohammed, Afzal R. (Elsevier, 2015-10)
    The acceleration of solid dosage form product development can be facilitated by the inclusion of excipients that exhibit poly-/multi-functionality with reduction of the time invested in multiple excipient optimisations. Because active pharmaceutical ingredients (APIs) and tablet excipients present diverse densification behaviours upon compaction, the involvement of these different powders during compaction makes the compaction process very complicated. The aim of this study was to assess the macrometric characteristics and distribution of surface charges of two powders: indomethacin (IND) and arginine (ARG); and evaluate their impact on the densification properties of the two powders. Response surface modelling (RSM) was employed to predict the effect of two independent variables; Compression pressure (F) and ARG percentage (R) in binary mixtures on the properties of resultant tablets. The study looked at three responses namely; porosity (P), tensile strength (S) and disintegration time (T). Micrometric studies showed that IND had a higher charge density (net charge to mass ratio) when compared to ARG; nonetheless, ARG demonstrated good compaction properties with high plasticity (Y = 28.01 MPa). Therefore, ARG as filler to IND tablets was associated with better mechanical properties of the tablets (tablet tensile strength (r) increased from 0.2 ± 0.05 N/mm2 to 2.85 ± 0.36 N/mm2 upon adding ARG at molar ratio of 8:1 to IND). Moreover, tablets’ disintegration time was shortened to reach few seconds in some of the formulations. RSM revealed tablet porosity to be affected by both compression pressure and ARG ratio for IND/ARG physical mixtures (PMs). Conversely, the tensile strength (r) and disintegration time (T) for the PMs were influenced by the compression pressure, ARG ratio and their interactive term (FR); and a strong correlation was observed between the experimental results and the predicted data for tablet porosity. This work provides clear evidence of the multi-functionality of ARG as filler, binder and disintegrant for directly compressed tablets.
  • The use of freeze-dried mannitol to enhance the in vitro aerosolization behaviour of budesonide from the Aerolizer®

    Kaialy, Waseem; Nokhodchi, Ali (Elsevier B.V., 2016-01)
    The efficiency of drug delivery from drug-carrier dry powder inhaler (DPI) systems is typically low. The purpose of this study was to examine the aerosolization performance of a hydrophobic drug, budesonide (BUD), from DPI formulations containing a promising carrier, freeze-dried mannitol (FDM), and to compare the results to those obtained previously with a hydrophilic drug, salbutamol sulphate (SS). The results showed that, in comparison to the formulation containing commercial BUD and commercial lactose, a total of 3.8-fold increase in the fine particle fraction (FPF) was obtained from the formulation containing FDM (FPF: 7.5% versus 29%) whereas a total of 4.6-fold increase in the FPF was obtained from the formulation containing FDM and leucine additive (FPF: 35%). Regression analysis showed DPI formulations containing carrier particles with a more elongated/less spherical shape, a higher content of fine particulates (< 5 μm) and a higher porosity to produce higher FPFs of BUD. FDM promoted the aerosolization of budesonide intended for pulmonary delivery. The addition of leucine (by 4.8%, w/w) has further improved the flow and the aerosolization properties of FDM. FDM produced higher aerodynamic diameters and smaller FPFs of BUD as compared to SS, attributable to BUD having a higher electrostatic charge density and a higher agglomeration tendency than SS.
  • Antisolvent crystallisation is a potential technique to prepare engineered lactose with promising aerosolisation properties: effect of saturation degree.

    Kaialy, Waseem; Nokhodchi, Ali (Elsevier, 2012-11-01)
    Engineered lactose particles were prepared by anti-solvent crystallisation technique using lactose solutions with different saturation degrees. In comparison to commercial lactose, engineered lactose particles exhibited less elongated and more irregular shape (large aggregates composed of smaller sub-units), rougher surface texture, higher specific surface area, and different anomer form. Engineered lactose powders demonstrated smaller bulk density, smaller tap density, and higher porosity than commercial lactose powder. Dry powder inhaler (DPI) formulations containing engineered lactose and salbutamol sulphate as a model drug demonstrated improved drug content homogeneity and higher amounts of drug delivered to lower airway regions. Higher fine particle fraction of drug was obtained in the case of lactose powders with higher porosity, higher specific surface area and higher fine particle content (<5 μm). The results indicated that the higher the saturation degree of lactose solution used during crystallisation the smaller the specific surface area, the higher the amorphous lactose content, and the higher the β-lactose content of engineered lactose particles. Also, lactose powders obtained from lactose solution with higher degree of saturation showed higher bulk and tap densities and smaller porosity. Engineered lactose powders crystallized from lower saturation degree (20% and 30% w/v) deposited higher amounts of drug on lower airway regions. In conclusion, this study demonstrated that it is possible to prepare engineered lactose particles with favourable properties (e.g. higher fine particle fraction and better drug content homogeneity) for DPI formulations by using lactose solutions with lower degree of saturation during crystallisation process.
  • The influence of physical properties and morphology of crystallised lactose on delivery of salbutamol sulphate from dry powder inhalers.

    Kaialy, Waseem; Martin, Gary P; Larhrib, Hassan; Ticehurst, Martyn D; Kolosionek, Ewa; Nokhodchi, Ali (Elsevier, 2012-01-01)
    The aim of this work was to investigate the mechanistic evaluation of physicochemical properties of new engineered lactose on aerosolisation performance of salbutamol sulphate (SS) delivered from dry powder inhaler (DPI). Different crystallised lactose particles were obtained from binary mixtures of butanol:acetone. The sieved fractions (63-90 μm) of crystallised lactose were characterised in terms of size, shape, flowability, true density and aerosolisation performance (using multiple twin stage impinger (MSLI), Aerolizer(®) inhaler device, and salbutamol sulphate as a model drug). Compared to commercial lactose, crystallised lactose particles were less elongated, covered with fine lactose particles, and had a rougher surface morphology. The crystallised lactose powders had a considerably lower bulk and tap density and poorer flow when compared to commercial lactose. Engineered carrier with better flow showed improved drug content homogeneity, reduced amounts of drug "deposited" on the inhaler device and throat, and a smaller drug aerodynamic diameter upon inhalation. Aerodynamic diameter of salbutamol sulphate increased as lactose aerodynamic diameter decreased (linear, R(2)=0.9191) and/or as fine particle lactose content increased (linear, R(2)=0.8653). Improved drug aerosolisation performance in the case of crystallised lactose particles was attributed to lower drug-carrier adhesion forces due to a rougher surface and higher fine particle content. In conclusion, this work proved that using binary combinations of solvents in crystallisation medium is vital in modification of the physicochemical and micromeritic properties of carriers to achieve a desirable aerosolisation performance from DPI formulations. Among all lactose samples, lactose particles crystallised from pure butanol generated the highest overall DPI formulations desirability.
  • Engineered mannitol ternary additives improve dispersion of lactose-salbutamol sulphate dry powder inhalations.

    Kaialy, Waseem; Nokhodchi, Ali (Springer, 2013-07)
    The aim of this study was to evaluate the influence of novel engineered fine mannitol particles (4.7%, w/w) on the performance of lactose-salbutamol sulphate dry powder inhaler (DPI) formulations to obtain promising aerosolisation properties. The results showed that the more elongated the fine mannitol particles, the weaker the drug-carrier adhesion, the better the drug content homogeneity, the higher the amount of drug expected to be delivered to the lower airways and the higher the total DPI formulation desirability. Linear relationships were established showing that mannitol particles with a more elongated shape generated powders with broader size distributions and that were less uniform in shape. The weaker the drug-carrier adhesion, the higher the fine particle fraction of the drug is upon aerosolisation. It is believed that more elongated fine mannitol particles reduce the number of drug-carrier and drug-drug physical contact points and increase the ability of the drug particles to travel into the lower airways. Additionally, a lower drug-carrier contact area, lower drug-carrier press-on forces and easier drug-carrier detachment are suggested in the case of formulations containing more elongated fine mannitol particles. Ternary 'drug-coarse carrier-elongated fine ternary component' DPI formulations were more favourable than both 'drug-coarse carrier' and 'drug-elongated coarse carrier' binary formulations. This study provides a comprehensive approach for formulators to overcome the undesirable properties of dry powder inhalers, as both improved aerosolisation performance and reasonable flow characteristics were obtained using only a small amount of elongated engineered fine mannitol particles.
  • Influence of lactose carrier particle size on the aerosol performance of budesonide from a dry powder inhaler

    Kaialy, Waseem; Alhalaweh, Amjad; Velaga, Sitaram P.; Nokhodchi, Ali (Elsevier, 2012-09)
    The purpose of this study was to evaluate the effect of carrier particle size on properties of dry powder and its effect on dry powder inhaler (DPI) performance. Commercial α-lactose-monohydrate, a commonly used carrier in DPI formulations, was carefully sieved to obtain different lactose size fractions, namely Lac A (90–125 μm), Lac B (63–90 μm), Lac C (45–63 μm), Lac D (20–45 μm), and Lac E (< 20 μm). The lactose samples were analysed in terms of size, shape, solid state, density, and flowability. Lactose particles were blended with budesonide (< 5 μm) powder to generate five different formulations. These formulations were then evaluated in terms of budesonide–lactose adhesion properties, drug content homogeneity, and in vitro aerosolisation performance. The results demonstrated that lactose samples with smaller particle volume mean diameter have higher amorphous lactose content, higher true density (linear, r2 = 0.9932), higher surface smoothness (linear, r2 = 0.8752), smaller angularity (linear, r2 = 0.921), smaller bulk density, higher porosity (linear, r2 = 0.914), poorer flowability, and higher specific surface area. In general, the smaller the lactose particles the smaller are the budesonide–lactose adhesion properties. Budesonide formulated with smaller lactose particles exhibited smaller aerodynamic diameter and higher amounts of budesonide were delivered to lower stages of the impactor indicating improved DPI aerosolisation performance. However, the use of lactose particles with smaller volume mean diameter had a detrimental effect on budesonide content homogeneity and caused an increase in the amounts of budesonide deposited on oropharyngeal region. Therefore, particle size of the lactose within dry powder inhaler formulations should be selected carefully. Accordingly, higher drug aerosolisation efficiency of lactose particles with smaller size may have to be balanced due to considerations of other disadvantages including poorer flowability, reduced formulation stability, higher potential side effects, and higher dose variability.
  • Effect of carrier particle shape on dry powder inhaler performance.

    Kaialy, Waseem; Alhalaweh, Amjad; Velaga, Sitaram P; Nokhodchi, Ali (Elsevier, 2011-12-12)
    The aim of this study was to characterise the aerosolisation properties of salbutamol sulphate (SS) from dry powder inhaler (DPI) formulations containing different carrier products. The difference in the elongation ratio (ER) of the different carriers was highlighted. Different set of carriers, namely commercial mannitol (CM), commercial lactose (CL), cooling crystallised mannitol (CCM), acetone crystallised mannitol (ACM) and ethanol crystallised mannitol (ECM) were used and inspected in terms of size, shape, density, crystal form, flowability, and in vitro aerosolisation performance using Multi Stage Liquid Impinger (MSLI) and Aerolizer inhaler device. Solid-state and morphological characterization showed that CM product was in pure β-form having particles with smaller ER (CM: ER=1.62 ± 0.04) whereas ACM and ECM mannitol particles were in pure α form with higher ER (ACM: ER=4.83 ± 0.18, ECM: ER=5.89 ± 0.19). CCM product crystallised as mixtures of β-form and δ-form and showed the largest variability in terms of particle shape, size, and DPI performance. Linear relationships were established showing that carrier products with higher ER have smaller bulk density (D(b)), smaller tap density (D(t)), higher porosity (P), and poorer flow properties. In vitro aerosolisation assessments showed that the higher the ER of the carrier particles the greater the amounts of SS delivered to lower airway regions indicating enhanced DPI performance. Yet, DPI performance enhancement by increasing carrier ER reached a "limit" as increasing carrier ER from 4.83±0.18 (ACM) to 5.89±0.19 (ECM) did not significantly alter fine particle fraction (FPF) of SS. Also, carrier particles with higher ER were disadvantageous in terms of higher amounts of SS remained in inhaler device (drug loss) and deposited on throat. Linear relationship was established (r(2)=0.87) showing that the higher the carrier ER the lower the drug emission (EM) upon inhalation. Moreover, poorer flowability for carrier products with higher ER is disadvantageous in terms of DPI formulation dose metering and processing on handling scale. In conclusion, despite that using carrier particles with higher ER can considerably increase the amounts of drug delivered to lower airway regions; this enhancement is restricted to certain point. Also, other limitations should be taken into account including higher drug loss and poorer flowability.
  • The enhanced aerosol performance of salbutamol from dry powders containing engineered mannitol as excipient.

    Kaialy, Waseem; Martin, Gary P; Ticehurst, Martyn D; Momin, Mohammed N; Nokhodchi, Ali (el, 2010-06-15)
    The aim of the present study was to investigate the effect of crystallising mannitol from different binary mixtures of acetone/water on the resultant physical properties and to determine the effects of any changes on in vitro aerosolisation performance, when the different mannitol crystals were used as a carrier in dry powder inhaler formulations containing salbutamol sulphate. Mannitol particles were crystallised under controlled conditions by dissolving the sugar in water and precipitating the sugar using binary mixtures of acetone/water in different percentages as anti-solvent media. For comparison purposes the physical properties and deposition behaviour of commercially available mannitol were also studied. SEM showed that all crystallised mannitol particles were more elongated than the commercial mannitol. Solid state studies revealed that commercial mannitol and mannitol crystallised using acetone in the presence of 10-25% v/v water as anti-solvent was beta-polymorphic form whereas mannitol crystallised in the presence of a small amount of water (0-7.5%) was the alpha-form. All the crystallised mannitol samples showed poor flowability. Nevertheless, the powdered crystallised mannitol and commercial samples were blended with salbutamol in the ratio 67.5:1. The aerosolisation performance of the formulations containing the engineered mannitol (evaluated using Multi Stage Liquid Impinger) was considerably better than that of the commercial mannitol formulation (the fine particle fraction was increased from 15.42% to 33.07-43.99%, for the formulations containing crystallised mannitol). Generally, carriers having a high tapped density and high fraction of fine carrier particles produced a high FPF. The improvement in the DPI performance could be attributed to the presence of elongated carrier particles with smooth surfaces since these are believed to have less adhesive forces between carrier and the drug resulting in easier detachment of the drug during the inhalation.
  • Dry powder inhalers: mechanistic evaluation of lactose formulations containing salbutamol sulphate.

    Kaialy, Waseem; Ticehurst, Martyn; Nokhodchi, Ali (Elsevier, 2012-02-28)
    The purpose of this study was to evaluate the relationships between physicochemical properties and aerosolisation performance of different grades of lactose. In order to get a wide range of physicochemical properties, various grades of lactose namely Flowlac 100 (FLO), Lactopress anhydrous 250 (LAC), Cellactose 80 (CEL), Tablettose 80 (TAB), and Granulac 200 (GRA) were used. The different lactose grades were carefully sieved to separate 63-90 μm particle size fractions and then characterised in terms of size, shape, density, flowability, and solid state. Formulations were prepared by blending each lactose with salbutamol sulphate (SS) at ratio of 67.5:1 (w/w), and then evaluated in terms of SS content uniformity, lactose-SS adhesion properties, and in vitro aerosolisation performance delivered from the Aerolizer. Sieved lactose grades showed similar particle size distributions (PSDs) and good flow properties but different particle shape, particle surface texture, and particle solid state. Content uniformity assessments indicated that lactose particles with rougher surface produced improved SS homogeneity within DPI formulation powders. Lactose-SS adhesion assessments indicated that lactose particles with more elongated shape and the rougher surface showed smaller adhesion force between lactose and salbutamol sulphate. Lactose powders with higher bulk density and higher tap density produced smaller emission (EM) and higher drug loss (DL) of SS. In vitro aerosolisation for various lactose grades followed the following rank order in terms of deposition performance: GRA>TAB>LAC ≈ CEL>FLO. Linear relationships were established showing that in order to maximize SS delivery to lower airway regions, lactose particles with more elongated shape, more irregular shape, and rougher surface are preferred. Therefore, considerable improvement in DPI performance can be achieved by careful selection of grade of lactose included within DPI formulations.
  • The influence of vitamin E succinate on the stability of polyethylene oxide PEO controlled release matrix tablets.

    Shojaee, Saeed; Cumming, Iain; Kaialy, Waseem; Nokhodchi, Ali (Elsevier, 2013-11-01)
    Hydrophilic matrices are a principal technology used for extended release (ER) oral dosage forms and a recent review concluded that their development is currently one of the most important challenges in pharmaceutical research. High molecular weight polyethylene oxides (PEOs) have been proposed as an alternative to hydroxypropylmethylcellulose (HPMC) for the manufacture of controlled release matrix tablets. It is known that PEO's are prone to oxidative degradation which can occur by chain scission and can be catalyzed by metal ions. In this study, we investigated the stability of PEO matrix tablets, of different molecular weight, containing diltiazem hydrochloride, when stored at 40 °C. The results show that there were dramatic increases in the release rate of the diltiazem following storage over only a few weeks, resulting in immediate release profiles after eight weeks, even for the highest molecular weight grade. We employed Gel permeation chromatography (GPC), viscosity and differential scanning calorimetry (DSC) techniques to try and determine the underlying causes of these dramatic shifts in dissolution profiles on storage. The results showed that there were significant decreases in the molecular weight of the PEO's during storage. The second part of the study looked at the addition of three different levels of vitamin E succinate to the tablets. The results clearly demonstrate the ability of the added antioxidant to reverse the significant reductions in molecular weight seen using GPC, viscosity and DSC. Importantly the addition of the antioxidant was able to stabilize the release profile of the diltiazem especially when present at a 1% level. Researchers and those working in pharmaceutical development should be aware of the potential stability risks when making matrix tablets containing PEO's and may wish to consider the addition of an antioxidant to the tablet formulation.
  • The influence of agitation sequence and ionic strength on in vitro drug release from hypromellose (E4M and K4M) ER matrices--the use of the USP III apparatus.

    Asare-Addo, Kofi; Kaialy, Waseem; Levina, Marina; Rajabi-Siahboomi, Ali; Ghori, Mohammed U; Supuk, Enes; Laity, Peter R; Conway, Barbara R; Nokhodchi, Ali (Elsevier, 2013-04-01)
    Theophylline extended release (ER) matrices containing hypromellose (hydroxypropyl methylcellulose (HPMC) E4M and K4M were evaluated in media with a pH range of 1.2-7.5, using an automated USP type III, Bio-Dis dissolution apparatus. The objectives of this study were to evaluate the effects of systematic agitation, ionic strength and pH on the release of theophylline from the gel forming hydrophilic polymeric matrices with different methoxyl substitution levels. Tribo-electric charging of hypromellose, theophylline and their formulated blends containing E4M and K4M grades has been characterised, along with quantitative observations of flow, compression behaviour and particle morphology. Agitations were studied at 5, 10, 15, 20, 25, 30 dips per minute (dpm) and also in the ascending and descending order in the dissolution vials. The ionic concentration strength of the media was also varied over a range of 0-0.4M to simulate the gastrointestinal fed and fasted states and various physiological pH conditions. To study the effect of ionic strength on the hydrophilic matrices, agitation was set at 20 dpm. The charge results on individual components imply that the positively charged particles have coupled with the negatively charged particles to form a stable ordered mixture which is believed to result in a more homogeneous and stable system. The particle shape analysis showed the HPMC K4M polymer to have a more irregular morphology and a rougher surface texture in comparison to the HPMC E4M polymer, possibly a contributory factor to the gelation process. The results showed gelation occurred quicker for the K4M tablet matrices. Drug release increased with increased agitation. This was more pronounced for the E4M tablet matrices. The ionic strength also had more of an effect on the drug release from the E4M matrices. The experiments highlighted the resilience of the K4M matrices in comparison with the E4M matrices. The results thus show that despite similar viscosities of E4M and K4M, the methoxyl substitution makes a difference to their control of drug release and as such care and consideration should be given to the choice of polymer used for extended release. The use of systematic change of agitation method and ionic strength may indicate potential fed and fasted effects on drug release from hydrophilic matrices.
  • Treating mannitol in a saturated solution of mannitol: a novel approach to modify mannitol crystals for improved drug delivery to the lungs.

    Kaialy, Waseem; Nokhodchi, Ali (Elsevier, 2013-05-01)
    The aim of this study was to evaluate the influence of treatment of a promising dry powder aerosol carrier (mannitol) on the aerosolization performance of salbutamol sulphate (SS) using a novel approach: treating excess commercial carrier particles in a saturated solution of the same carrier. Commercial mannitol (CM) particles were treated with aqueous mannitol supersaturated solutions (20% and 25% w/v), under stirring, (300 rpm) for either 24h or 48 h. The results showed that particle treatment did not alter the polymorphic form of mannitol (β-mannitol); however, all treated mannitol particles demonstrated smoother surface topography and improved aerosolization performance compared to CM in dry powder inhalations. Unlike the concentration of mannitol solution used during treatment, the time of treatment to collect mannitol crystals was an essential key to modify the physical properties of mannitol and its effect on the aerosolization performance. In comparison to mannitol particles treated for 48 h, mannitol particles treated for 24h demonstrated larger size, more elongated-less regular shape, and smoother surfaces. No apparent relationship was obtained between in vitro aerosolisation behavior of SS with either mannitol particle size or shape descriptors. However, despite their larger size and more irregular-less uniformed shape, treated mannitol particles with smoother surfaces generated drug particles with smaller aerodynamic size and are expected to deliver higher amounts of drug to lower airways. The results demonstrated the potential of treating mannitol particles in aqueous solutions of the same material under controlled conditions to produce mannitol particles promising for dry powder inhaler systems. The results suggested that mannitol particle surface texture properties dominate over both particle size and particle shape of mannitol in terms of determining the aerosolization performance of mannitol.
  • A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles.

    Hussain, Tariq; Kaialy, Waseem; Deng, Tong; Bradley, Mike S A; Nokhodchi, Ali; Armour-Chélu, David (Elsevier, 2013-01-30)
    Electrostatic charge is generated during powder handling due to particle-particle and particle-wall collisions, rubbing, sliding, and rolling. In case of bipolar charge generation, the electrostatic forces may significantly change the inner forces and increase powder adhesion and cause a serious problem in material handling process. Therefore, the knowledge of distribution of charge across the individual particles is helpful to identify the role of triboelectrification and the effects of various relevant variables especially change in the contact materials, environmental conditions during processing, etc. A novel approach based on inductive sensor has been developed to detect the either polarity of charged particle and to characterise the bipolar charge distribution in the population of particulate material. To achieve this, an amplification unit configured as a pure integrator and signal processing techniques has been used to de-noise and correct the baseline of signal and MATLAB algorithm developed for peak detection. The polarity of charged particles obtained by this method is calibrated with Faraday pail method and the results are promising. Experimental study has been carried out by using two distinct populations of oppositely charged particles (glass beads-PVC, olivine sand, and silica sand). The obtained results indicate that the method is able to detect the distribution of polarities of charged particles.
  • Crystal engineering of ibuprofen using starch derivatives in crystallization medium to produce promising ibuprofen with improved pharmaceutical performance

    Nokhodchi, Ali; Homayouni, Alireza; Araya, Ruta; Kaialy, Waseem; Obeidat, Wasfy; Asare-Addo, Kofi (Royal Society of Chemistry, 2015)
    Ibuprofen exhibits poor flow, poor compaction and dissolution behaviour, and it is prone to capping after ejection from the die. Therefore, the aim of the present research was to engineer ibuprofen crystals in the presence of two disintegrants (starch and sodium starch glycolate) in order to improve its flow, compactibility and dissolution behaviour simultaneously. To this end ibuprofen and different concentrations of disintegrant (0.25 to 10% w/w in case of starch and 0.25 to 7% w/w in case of sodium starch glycolate) were dissolved in ethanol and water respectively. The ibuprofen solution was then added to the aqueous solutions containing the different concentrations of disintegrant. Ibuprofen precipitated within 10 min and the crystals were separated and dried for further studies. The obtained crystals were characterized in terms of flow, density, tablet hardness, dissolution behaviour and solid state. The results showed most of engineered ibuprofen to have better flow with a high compactibility. The results also showed that an increase in the concentration of starch in the crystallization medium resulted in a reduction in the hardness of ibuprofen tablets, but this was not the case for ibuprofen samples engineered in the presence of sodium starch glycolate. It is interesting to note that although engineered ibuprofen showed superior dissolution as compared to untreated ibuprofen, the highest concentration of starch (10%) or sodium starch glycolate (7%) slowed down the release remarkably due to an increase in the viscosity of the dissolution medium around drug particles. Solid state analysis (FT-IR, XRPD and DSC) ruled out the presence of different polymorphic forms and also any interaction between these disintegrants and ibuprofen. In conclusion, the engineering of ibuprofen in the presence of disintegrant showed how properties such as flow, compaction and dissolution behaviour can be simultaneously manipulated to suit a desired application.
  • Dissolution and solid state behaviours of carbamazepine-gluconolactone solid dispersion powders: The potential use of gluconolactone as dissolution enhancer

    Nokhodchi, Ali; Al-Hamidi, Hiba; Antonijevic, Milan D.; Owusu-Ware, Samuel; Kaialy, Waseem (Elsevier, 2015-08)
    Solid dispersions are one of the most effective methods for improving the dissolution rate of poorly water-soluble drugs; however, this is reliant on the selection of a suitable carrier and solvent. The present study is the mechanistic evaluation of the changes in polymorphic form of carbamazepine when the type of solvent and the concentration of d-gluconolactone (d-GL) change. The studies reported herein also explore the use of d-GL as a potential hydrophilic carrier to improve the dissolution rate of a poorly water-soluble drug, carbamazepine (CBZ), from physical mixtures and solid dispersion formulations. The effect of using different solvents in the preparation of solid dispersion formulations was also investigated. Different ratios of solid dispersions of the drug and d-GL were prepared using a conventional solvent evaporation method. Different solvents (ethanol, acetone and water) were used as a second experimental variable in the preparation of solid dispersions. Physical mixtures of CBZ and d-GL were also prepared for comparison. The results showed that the presence of d-GL can increase the dissolution rate of CBZ compared to pure CBZ. This study showed that d-GL could be used as a new carrier in solid dispersion formulations and physical mixtures. The interesting solid state behaviour of CBZ in all solid dispersions in the presence of d-GL was fully analyzed using Fourier-transform infrared (FT-IR), X-ray powder diffraction (XRPD), scanning electron microscope (SEM), hot stage microscopy (HSM) and differential scanning calorimetry (DSC). The results showed that depending on the type of solvent and concentration of d-GL used in the preparation of solid dispersions different forms of CBZ (Form I, Form III and dihydrate) can be existed in the formulations

View more