|
Wolverhampton Intellectual Repository and E-Theses >
School of Technology >
School of Engineering and the Built Environment >
Engineering and Technology >
Browsing WIRE
Browsing "Engineering and Technology" by Issue Date
Showing results 1 to 20 of 29
| Issue Date | Title | Author(s) | 2007 | Energy Absorption Capacity of Prismatic Cellular Metals | Kaaz, Michael; Hall, Frank Richard; Spence, J.; Bauer, H. |
2007 | Finite Element Modelling of Multipass Fusion Welding with Application to Complex Geometries | Jiang, Wei; Yahiaoui, Kadda |
2007 | Finite Element Prediction of Residual Stress Distributions in a Multipass Welded Piping Branch Junction | Jiang, Wei; Yahiaoui, Kadda |
2007 | Investigation into the Effect of Cutting Environment on Tool Life during the Milling of a BS970-080A15 (En32b) Low Carbon Steel | Stanford, Mark; Lister, Paul M.; Kibble, Kevin A. |
2007 | Burst Strength Analysis of Casing with Geometrical Imperfections | Huang, Xiaoguang; Chen, Yanyun; Lin, Kai; Mihsein, Musa; Kibble, Kevin A.; Hall, Richard |
2006 | Rapid Manufacturing of Metal Components by Laser Forming | Santos, Edson Costa; Shiomia, Masanari; Osakada, Kozo; Laoui, Tahar |
2006 | Controlling the Cold Roll Forming Design Process | Mynors, Diane J.; English, M.; Castellucci, M.; Bramley, Alan N. |
2006 | Some characteristics of rolling-element bearings under oscillating conditions. Part 3: experimental results for clearance-fitted taper-roller bearings and their relevance to the design of spindles with high dynamic stiffness | Lambert, R. J.; Pollard, Andrew; Stone, B. J. |
2006 | Some characteristics of rolling-element bearings under oscillating conditions. Part 1: theory and rig design | Lambert, R. J.; Pollard, Andrew; Stone, B. J. |
2006 | Some characteristics of rolling-element bearings under oscillating conditions. Part 2: experimental results for interference-fitted taper-roller bearings | Lambert, R. J.; Pollard, Andrew; Stone, B. J. |
2006 | Properties of Titanium Dental Implant Models made by Laser Processing | Laoui, Tahar; Santos, Edson Costa; Shiomia, Masanari; Morita, M.; Shaik, S. K.; Tolochko, Nikolay K.; Abe, F.; Takahashi, M. |
2005 | Finite Element Predictions of Temperature Distributions in a Multipass Welded Piping Branch Junction | Jiang, Wei; Yahiaoui, Kadda; Hall, Frank Richard |
2005 | Finite Element Simulation of Multipass Welding: Full Three-Dimensional Versus Generalized Plane Strain or Axisymmetric Models | Jiang, Wei; Yahiaoui, Kadda; Laoui, Tahar |
2005 | Investigation into the Relationship between Tool-Wear and Cutting Environments when Milling an Austenitic Stainless Steel and En32 Low Carbon Steel | Stanford, Mark; Lister, Paul M. |
2005 | Comparison of Sequentially and Fully Coupled Generalized Plane Strain FE Modelling of Multipass Welding | Jiang, Wei; Yahiaoui, Kadda; Hall, Frank Richard; Laoui, Tahar |
2004 | The effect of windowing in Fourier transform profilometry applied to noisy images | Berryman, Fiona; Pynsent, Paul; Cubillo, James |
2004 | Investigation into the Relationship between Tool-Wear and Cutting Environments when Turning En32 Steel | Stanford, Mark; Lister, Paul M. |
2004 | Representing the Superplasticity of Inconel 718 | Zhang, B.; Mynors, Diane J.; Mugarra, A.; Ostolaza, K. |
2003 | Innovative Product Development and Supporting SMEs | Hall, Frank Richard |
2003 | Lasers and Materials in Selective Laser Sintering | Kruth, J. P.; Wang, X.; Laoui, Tahar; Froyen, Ludo |
Showing results 1 to 20 of 29
|
